Steady Eddie's video: RC Motorcycle with hanging on rider onboard camera steering system

I remodeled a toy RC motorcycle. It is valuable for the rider to hanging on in 1/12 scale RC. I changed the transmitter / receiver to S-FHSS. The steering mechanism is a push-pull rod system. The motor is standard, but the speed is increased because the gear ratio is changed. It is easy to handle because the torque is small. This bike has excellent steering maneuverability. Straightening the steering will quickly bring the bike upright. Maneuvering is the same as for four wheels. Ordinary RC motorcycle cannot stand upright unless the steering is operated in the opposite direction. This bike features a small caster angle. The caster angle is 12 degrees. The offset has been increased from 7mm to 10mm. I tried 8mm, but it didn't stand upright. The weak point is the running performance of the gap. The final corner is always shaken and sometimes goes off course. Car:R/C Racing Rider Motorcycle Length:180mm, width:156mm, height:138mm Weight:216g Camera:Turbowing DVR 700 TVL Transmitter:FUTABA 4PM 2.4GHz Receiver:R202GF Shooting location:MYHOME RC CIRCUIT Let's live a good RC life! Produced by ATECHNO