Ansys-Tutor's video: ANSYS Fluent Tutorial Conjugate Heat Transfer in a Rectangular Channel with Protrusions Part 1 2

There is a conjugate heat transfer in a rectangular channel, in which there are some Rectangular protrusions aligned at an angle of 45 degrees to the flow velocity. Water enters at a velocity of 0.00835m/s & Temp of 295 K, there is a constant heat flux from the heater wall at a 12500 W/m^2. Find out the surface Nusselt number & Skin friction coefficient on the heater surface. What will you learn from this tutorial? ✔How to set up a conjugate heat transfer problem in ANSYS. ✔How to mesh the geometry using sweep mesh method. ✔How to plot a reference line along any Boundary surface. ✔How to find out surface Nusselt number plot, skin friction coefficient on a protruded surface. Tutorial Part 1: Geometry & Meshing: https://youtu.be/5JoL_Qbxxq0 Tutorial Part 2 : Setup & CFD Post: https://youtu.be/pav5rnq2jhk Please subscribe to our channel.