CG Smithing's video: Building my 50 Ton Forge Press from start to finish 43ish

@Building my 50 Ton Forge Press from start to finish!!!(43ish)

After all the math it equaled out to almost 43 tons with the 3hp motor. Frame material was 8" structural beam. all measurements were mentioned in the video. Hoses are each 4' long, diameter and fittings were chosen by the nice people at Princess auto and assembled there too. https://www.princessauto.com/en/6-in-bore-x-10-in-stroke-hydraulic-press-cylinder/product/PA0008649675 3HP Power pack - https://www.princessauto.com/en/2-stage-ac-multifunction-hydraulic-power-units/product/PA1000000665?skuId=8677247 Control Valve - https://www.princessauto.com/en/bm40-single-spool-directional-control-valve/product/PA0008669715

595

CG Smithing

Subscribers
6.4K

Total Post
61

Total Views
382.5K

Avg. Views
6.3K

View Profile

This video was published on 2021-04-12 01:30:00 GMT by @CG-Smithing on Youtube. CG Smithing has total 6.4K subscribers on Youtube and has a total of 61 video.This video has received 595 Likes which are higher than the average likes that CG Smithing gets . @CG-Smithing receives an average views of 6.3K per video on Youtube.This video has received 86 comments which are higher than the average comments that CG Smithing gets . Overall the views for this video was lower than the average for the profile.

CG Smithing's video: Building my 50 Ton Forge Press from start to finish 43ish

Other post by @CG Smithing