Cosmo Channel's video: UPGRADE CNC 3018 PRO Z-PROBE Z Axis tool probe GRBL EASEL SUB

👇 EXPAND TO SEE PRODUCT LINKS! 👇 In this video I show you how to create and configure a z-probe tool. Simply connect one cable to the A5 pin and the other to the GND pin. For configuration on GRBL use this command line: G21G91 G38.2 Z-50 F50.00G10 L20 P0 Z1.60 G91 G21 G0 Z10 where G21 = Sets units in millimeters (G20 in inches); G91 = Set to Relative Position G38.2 = Enable Z-Probe Z-50 = descent speed F50.00 = ascent speed G10 = Withdraw z-axis when touching the plate L20 = ascent distance P0 = ????? Z1.60 = Plate thickness G0 = Linear rapid movement Z10= ???? I don't quite understand everything about this command line but it still works perfectly. And as I always say, "Don't fix what isn't broken." 🔗Set with Alligator: Cliphttps://www.banggood.com/custlink/G33DsAppvP 🔗 DC Connector Male Plug And Female : https://www.banggood.com/custlink/3m33snrcD0 🔗Laminate PCB Board: https://www.banggood.com/custlink/v3GmsApJYh 🔗 T12 Digital Soldering Station: https://www.banggood.com/custlink/KD33AiVEtG 🔗 CNC 3018: https://www.banggood.com/custlink/vKDDpyS3ga 🔗 CNC 3018 PRO: https://www.banggood.com/custlink/m3Gm0A51K3 🔗EASEL: http://easel.inventables.com/ Support the Channel!!: https://paypal.me/pools/c/8e6KvlwLql ____________________________________________________________________ ▶ MUSIC By LAKEY INSPIRED https://soundcloud.com/lakeyinspired