Dan the Fix it Man's video: 2013 HYUNDAI ACCENT - HOW TO REPLACE REAR BRAKE PADS ROTORS - DIY

https://amzn.to/2LpDAaj This kit is for both front and rear brake pads & Front & Rear Brake Rotors https://amzn.to/2L6obdd Sil-Glyde Brake Grease https://amzn.to/3bJ8qot Caliper Compression Tool used in the video https://amzn.to/2ZgLMNR Impact Screwdriver https://amzn.to/31UWQ5a Tekton Long Handle 3/8"drive Ratchet https://amzn.to/3dTVfm2 Milwaukee M12 FUEL 3/8" drive Extended Reach Impact Ratchet https://amzn.to/2T4l8aP GearWrench Torque Wrench Used in the video Just a quick and easy video showing how to replace the rear brake pads and Rotors on a 2013 Hyundai Accent. If you live in an area where vehicles are prone to rust, you might want to have a few of the replacement screws that hold the rotor on the hub available in case they don't want to come off. I also made a video showing how I replaced the front brake pads & rotors on this same vehicle: https://youtu.be/ZeGZQZQ1mx0 Tools needed: A large screwdriver or small prybar 14mm socket and/or wrench Large Philips number 3 Impact Screwdriver Hammer Torque Wrench Torque spec that I found online for the caliper slide pin bolt is 23 ft. lbs. Torque spec that I found online for the Caliper Bracket bolt is 53 ft lbs. Thanks for watching! Please Subscribe! -Dan the Fix it Man www.danthefixitman.org www.amazon.com/shop/danthefixitman Song used in the video: "The High Line" by Causmic