Duncan Dimanche's video: Opening macbook pro touch bar the EASY way

You will need to use a P5 Pentalobe driver to remove the six screws securing the lower case You can check out the Ifixit page to get all the details of the tools you will need. They do a good job on showing the details but I don't get why they need that suction cup thingy :) I hope that this helps ! It's the same process all the touch bar macbook : macbook pro 13" Macbook pro 15" Macbook pro 16" here is the code to shut off your computer : Before starting this procedure, you must disable your Mac's Auto Boot feature. Auto Boot powers on your Mac when you open the lid, and may be accidentally triggered during disassembly. Use this guide or follow the abbreviated instructions below to disable Auto Boot. Power on your Mac and launch Terminal. Copy and paste the following command (or type it exactly) into Terminal: sudo nvram AutoBoot=%00 Press [return]. If prompted, enter your administrator password and press [return] again. Note: Your return key may also be labeled ⏎ or "enter." You can now safely power down your Mac and open the bottom case, without it accidentally powering on. When your repair is complete and your Mac is successfully reassembled, re-enable Auto Boot with the following command: sudo nvram AutoBoot=%03