×

GarageTech's video: How to replace your brake pads Audi Q5 A4 A5 2008 - 2016

@How to replace your brake pads Audi Q5 A4 A5 2008 - 2016
So I recorded the process on how to replace some brake pads on an Audi Q5 with the standard brake setup. This will be the same setup on an Audi A4 and A5 with the standard brakes. The process of changing brake pads on other vehicles is very similar and the general steps remain the same. This is a fairy straight forward job and anyone with a decent set of tools and capability could perform this job. Tools and equipment needed are: Jack to raise the vehicle 17mm socket with a long bar to remove the wheel bolts 13mm socket and ratchet to remove the two caliper bolts Large flat blade screwdriver or leaver bar to remove retaining spring Hammer to help remove the pads from the caliper Large plyers/grips to push the caliper piston back in Wire brush or file to clean the pad carrier Brake cleaner solution Brake grease Small screwdriver or pick to help release the pad wear sensor plug As a disclaimer please don't forget that the brakes are the most important part of any vehicle and failing to repair them to manufacture standards could cause harm or death to yourself or others. Work should only be carried out by trained professionals.

1K

67
GarageTech
Subscribers
29.6K
Total Post
125
Total Views
4.2M
Avg. Views
56.7K
View Profile
This video was published on 2017-02-04 03:55:46 GMT by @GarageTech on Youtube. GarageTech has total 29.6K subscribers on Youtube and has a total of 125 video.This video has received 1K Likes which are higher than the average likes that GarageTech gets . @GarageTech receives an average views of 56.7K per video on Youtube.This video has received 67 comments which are higher than the average comments that GarageTech gets . Overall the views for this video was lower than the average for the profile.GarageTech #Audi #brakes #pads #howto #change #mechanic #diy has been used frequently in this Post.

Other post by @GarageTech