IoTT's video: Build your own YellowHat Video 50

The YellowHat is now available in the Tindie shop, and I have also published all design related information on my Github page under the Open hardware license. In this video I show you step by step how you can build a YellowHat for yourself. Tindie Store: https://www.tindie.com/stores/tanner87661/ IoTT Stick Github Repository: https://Github.com/tanner87661/IoTTStick MyIoTT.org: http://myiott.org/ Materials: DC Power plug: https://lcsc.com/product-detail/AC-DC-Power-Plugs-Receptacles_Korean-Hroparts-Elec-DC-005-20A_C136744.html Hex screw M2 x10: https://www.amazon.com/gp/product/B01AXUSN1Y Mini MP1584EN DC-DC Buck Converter: https://www.amazon.com/gp/product/B01MQGMOKI Right Angle Single Row 40-pin 2.54mm Male: https://www.amazon.com/gp/product/B01461DQ6S Male Header Pin, 40 Pin Header Strip (2.54 mm): https://www.amazon.com/MCIGICM-Header-2-45mm-Arduino-Connector/dp/B07PKKY8BX Ribbon Cable 12pol. 1.27mm pitch: https://www.aliexpress.com/item/32998004363.html 12P IDC Socket Pin Dual Row Pitch 2.54mm: https://www.aliexpress.com/item/4000853215263.html PLA Filament yellow: https://www.amazon.com/NOVAMAKER-3D-Printer-Filament-Dimensional/dp/B071JRPCRJ JST SM 3PIN Plug Male to Female 15cm EL Wire Cable Connector Adapter for WS2811: https://www.amazon.com/RGBZONE-20Pairs-Connector-Adapter-WS2812B/dp/B075K4HLTQ Tools: Arduino Uno for use as ISP: https://www.arduino.cc/en/Tutorial/ArduinoISP FTDI programmer to load firmware: https://www.amazon.com/gp/product/B07XF2SLQ1 Male-male jumper wires for Arduino: https://www.amazon.com/EDGELEC-Breadboard-Optional-Assorted-Multicolored/dp/B07GD2BWPY 0:00 Start 0:30 Ordering and Preparing Parts 4:04 Printing the enclosure 4:39 Preparing sensor cables 5:25 Loading the firmware 7:05 Mounting components 8:50 Inspection and testing 9:40 Trouble shooting 10:26 Voltage adjustment 11:15 Final assembly 12:00 Installation on layout 13:15 Closing thoughts