Iuri's Workshop's video: DIY Cool Soldering Irons

@DIY Cool Soldering Irons

Related topics: DIY Pulse Soldering Iron: https://youtu.be/X3VpFnAO6Rw DIY Powerful Heat Gun: https://youtu.be/EgdeAdeUcMk Source materials: 1. Tin can 2. Nichrome Ø0.2mm 3. Dry branch from the park 4. Locking screw М2х3 5. Locking screw М4х5 6. Screw М1.6х2 7. Nuts М4 8. Fluoroplastic tape 9. Copper wire Ø3mm 10. Spring from a ballpoint pen 11. Silicon dioxide (silicon flour) 12. Liquid glass 13. Caustic soda 14. Powdered sugar 15. Fiberglass tube Ø0.7mm 16. Hollow rivet Ø4mm 17. Epoxy glue 18. Lacquer nitrocellulose 19. Electric cable with plug Soldering iron technical data: Nichrome - Ø0.2mm Resistances 20 Ohm Voltage - 0 ... 15 Volts Current - 0.75 Ampere Power 10 W 350⁰C in 3 minutes High temperature mastic recipe: 100 parts quartz flour (silicon dioxide SiO2) 4 parts caustic soda (sodium hydroxide NaCO) 2 parts caster sugar 20 parts of liquid glass (silicate glue) High-temperature mastic drying mode: 1 day at room temperature, 1 hour at a temperature of 100°C, 1 hour at a temperature of 200°C 1 hour at a temperature of 300°C # soldering # solderingiron

# # #diy

719

Iuri's Workshop

Subscribers
102K

Total Post
109

Total Views
12.7M

Avg. Views
152.9K

View Profile

This video was published on 2020-08-01 22:38:45 GMT by @Iuri's-Workshop on Youtube. Iuri's Workshop has total 102K subscribers on Youtube and has a total of 109 video.This video has received 719 Likes which are lower than the average likes that Iuri's Workshop gets . @Iuri's-Workshop receives an average views of 152.9K per video on Youtube.This video has received 24 comments which are lower than the average comments that Iuri's Workshop gets . Overall the views for this video was lower than the average for the profile.Iuri's Workshop # # #diy has been used frequently in this Post.

Iuri's Workshop's video: DIY Cool Soldering Irons

Other post by @Iuri's Workshop