Killer Fuzz's video: 10 Hook Super Clouser Minnow fishing flyfishing flytying trout fish bassfishing bass shorts

Clouser Deep Minnow – Tying Instructions Although the Clouser Minnow is generally regarded as a simple pattern to tie, many tyers don’t utilize some of the original techniques used by Bob Clouser himself. Check out the step by step below for some tips on tying better looking Clousers. Materials: Hook: Daiichi 2141, sz. 2 Thread: UTC 140 Denier, White and Cerise Eyes: Large Painted Lead Eyes, Pearl White Tail/Body: White Bucktail Wing: Hot Pink Bucktail Flash: UV Pearl Krystal Step 1: Starting with white thread (or any color matching what will be the belly of the fly), attach your thread and advance approximately 1/3 down the shank. Step 2: Tie in lead eyes using figure-eight wraps both over AND underneath the shank. This will keep the eyes from rolling around the shank. Step 3: Prepare a small clump of white bucktail roughly 2-2.5 times the length of the shank and catch in front of the eyes. Trimming your bucktail to length before tying in will allow for a clean tie in point. Step 4: Pull the bucktail tight over the lead eyes while advancing thread to behind the lead eyes. Using your thumb and forefinger, pinch the shank of the hook, thus holding the bundle of bucktail on top of the shank. This is very important as this causes the thread to compress the bucktail against itself, rather than around the shank, causing the fibers not to flare more than desired. Wrap the thread over the bucktail to approximately the point of the hook using light wraps of thread. Step 5: Wrap the thread forward in touching turns to create a smooth body and return the thread to just in front of the lead eyes. Whip finish and trim. Step 6: Turn the fly over in the vise, and attach thread the same color as the top wing of the fly (in this case, pink). Keep in mind this is how the fly will ride in the water (hook point up). Step 7: Double over a few strands of Krystal Flash and tie in just in front of the lead eyes. The flash should extend slightly longer than the bucktail. Step 8: Catch in a wing of pink bucktail in front of the lead eyes, roughly the same length as the tail. Make a few loose wraps of thread to start before increasing tension. This helps to keep the fibers from flaring. Step 9: Build a nice head, whip finish, and cement.