Legit Racecraft's video: DIY Streetfighter 848 Clear clutch cover installation

@DIY Streetfighter 848 Clear clutch cover installation

Using the Fiat diagnostic OBDII adapter: (video coming soon) Rizoma Clear Timing Covers Installation: https://www.youtube.com/watch?v=A8T8A1QBLJg 10 Weird things with the Streetfighter 848: https://www.youtube.com/watch?v=3hZiq55MdpM 10 Things I LOVE about the Streetfighter 848: https://www.youtube.com/watch?v=m1S6gVht0Xc 10 Things I HATE about the Streetfighter 848: https://www.youtube.com/watch?v=VqD4IJOP3I The paint on the factory clutch cover was bubbling up and oxidizing underneath, so that means it's time to replace it! Between the Ducabike and the Rizoma clutch covers that are made for the 848, I decided to go with the Ducabike. It looks far better! The aluminum housing seems very sturdy and the packaging that it came is will definitely protect it during shipping. I believe it cost me around $750, but it is well worth it and fairly easy to install. No special tools were required to change it out. The most tricky part was sliding the cover around the foot lever, but it is still doable. The bracket that is on the front of the clutch cover (streetfighter models) does not fit around the new clutch cover. You will either have to grind the factory bracket down or make a bracket to hold the belly fairing (lower cowl). Torque specs: Clutch cover: 9nm (1st time) 10nm (2nd time) Clutch cover ring 4nm and then 5nm Oil sensor: 10nm Tools needed: 3mm, 4mm, 5mm hex key 24mm wrench for the oil sensor torque wrench with in/lbs or 9/10nm

rizoma ducabike clutch cover clear window with glass upgrade spyder spider slipper evo corse streetfighter 1098 1198 848 race dry wet ducati testastretta panigale red yoyodyne multistrada monster hypermotard diavel aem cnc racing oberon performance modified motocorse moto 1200 796 750 700 696 695 620 800 821 900 1000 1100 slave scrambler actuator spanner reservoir lever shift pressure plate sbk spring barnett evr cap carbon vented fiber ncr titanium ring kit friction discs

157

Legit Racecraft

Subscribers
18.1K

Total Post
212

Total Views
878.3K

Avg. Views
9.8K

View Profile

This video was published on 2018-12-27 08:35:14 GMT by @Legit-Racecraft on Youtube. Legit Racecraft has total 18.1K subscribers on Youtube and has a total of 212 video.This video has received 157 Likes which are higher than the average likes that Legit Racecraft gets . @Legit-Racecraft receives an average views of 9.8K per video on Youtube.This video has received 14 comments which are lower than the average comments that Legit Racecraft gets . Overall the views for this video was lower than the average for the profile.

Legit Racecraft's video: DIY Streetfighter 848 Clear clutch cover installation

Other post by @Legit Racecraft