The Regenerative Home's video: How to install a skylight on a Barn Roof no metal flashing shingles for DIY

I rolled the stick down adhesive across the base of the barn roof. And the next thing that I did was put a 12 inch wide piece of for to flash across the bottom of the skylight whenever you cross here, so whenever you flash a window or a door, you always want to shingle it like you would a roof. _Skylight _Roof So I put that underlayment here and then I shingled the flashing on top of it, and then the siding flashing goes on top of that the side of the skylight, so on both sides of the skylight. Then I'm going and I'm putting the next layer of the roofing underlayment on top Bobby's singling it over my last layer, there's a little bit of a sticky bit here, which will, it'll stick to. And then I decided to do it over the flashing of the skylight because I think that'll have better protection. And the next thing that I'm going to do, since this is a bitumen product and it's cold out, it's not sticking super well. So I'm going to take a propane court heated up and then stick it to the for flash, it'll, it'll work fine once I heat it up. detail here. Yes, putting the single and I'm attaching it to the side of the skylight. So the weakness in the system is if water gets inside the side of the skylight and it goes into the single can it can drip into the roofline. So what I've done is I glued it down underneath each single tab. And then right on the corner, you'll see it's hard to see, but you can see that that he's in line, that adhesive line right there. Using this camera, I am one structural adhesive, which I got an ABC supply their national chain. And this stuff is specifically for metal roofs, it's got a high temperature. So and I'm trying to adhere these asphalt shingles, to the metal roof. This is the system that the best system that I came up with, there's gonna be some flexing and the temperature but hopefully their products will be able to flex with the temperature changes, got a flashing layer around it already. And then this is a good German based under there, which is stuck to the flashing layer. And then in addition to that, I'm putting the adhesive and sticking the tiles in the corner. So I'm hoping that all three of those layers will make it so the skylights don't every week. Single that's going to cover the top of this skylight, I'm gonna put a layer of feelings underneath the top inside of this triangle and on the sides. And then on top. Security go back, bounce off and go around. So obviously I caught him to size and then you'll see the now going to another layer cold I actually took this car and put it inside by the fireplace because cold politics and construction and life devils in the details. So if I didn't come back and do this totally ineffective.Every little detail changes the functioning and effectiveness of what you're talking about what we're doing don't believe a politician who promises you promises a world but he's gotta back it up with generalizations. Sorry about all the movements.It's hard to.So if you look down that row there you see that's all sealed. It's glued underneath, underneath the single and then on the side of the single glued, and then underneath the shingle, and then on the side of the shingle, and your car is only as good as the grade that you use. So don't don't just buy the stock from Home Depot. It's not gonna work. For more related detail topics please visit our website: http://www.lushplanet.net ----------------------------------------------------------------------- Related video: https://youtu.be/JS1W3Ns2Zgw https://youtu.be/4KOxEhkD834 https://youtu.be/K9l4FoHNuiw https://youtu.be/LytUeaRKHnQ