MistHub's video: The Eleaf iJust 3 Kit First Look SMOK Stick Prince Comparison

Available at: https://www.misthub.com/products/eleaf-ijust-3-kit-with-ello-duro-tank The iJust 3 battery is a slender 3,000mAh battery that utilizes a strong cylindrical Stainless Steel chassis. The compact frame of the iJust 3 battery is ergonomic and sits comfortably in the hand, measuring only 86.3mm long and is 25mm wide. Since the iJust 3 battery is internal and non-removable, Eleaf has streamlined the charging process by equipping the iJust 3 battery with an easily-accessible Micro-USB port. Just below the Micro-USB charge port is a single battery status LED that brightly illuminates when charging to let you know the device is currently charging. Once the light disappears, the battery is fully charged and it’s time to unplug the battery from the charger. As of right now, the iJust 3 battery is the most powerful eGo style’d battery released by Eleaf to date—boasting an incredible 80W maximum wattage output that fires faster than ever at 25 milliseconds. Covering a wide-range of different builds and coil styles, the iJust 3 battery features an operational resistance-range that drops as low as 0.1 ohms and is capable of firing builds on the higher end at 3.0 ohms. Vape safety is important — especially when you’re dealing with internal battery devices — which is why Eleaf outfitted the iJust 3 battery with Dual Circuit protection. This increased protection allows for Overcharge Protection, Over-current Protection, as well as Over-Discharge protection so you can charge your battery at night in peace. The ELLO Duro Sub-Ohm Tank is the first tank of its kind, showcasing a sleek and stylish Stainless Steel construction that matches elegantly with its bulbous heat-resistant convex glass tube. The compact form-factor of the ELLO Duro measures only 51.2mm from drip tip to base, 28mm at its widest, and is 25mm in diameter. With its protruding glass tube the ELLO Duro can hold a staggering 6.5mL of vape juice. If that’s too much or you’d like to shave-off some width from the tank, Eleaf also includes a replacement 2mL straight-glass section that can be used instead. Sitting at the top of the ELLO Duro tank is a stylish Resin wide-bore 810 drip tip. This drip tip is removable and can be easily swapped out and customized with any of your favorite 810 drip tips. To fill this beast of a tank, simply push the top-cap backwards in the direction as indicated by the marking on the top-cap. Sliding open, the ELLO Duro reveals an easily-accessible single top-filling fill port that offers fast filling and painless re-filling. The pre-installed gasket is almost entirely closed off as an additional measure of leak-protection. If you struggle to fill the tank with the pre-installed gasket, Eleaf includes a secondary “wide-open” replacement gasket that can be used in place of the original gasket. Using some tweezers or a screwdriver, simply pull the original gasket out and insert the replacement. Perhaps what’s most impressive about ELLO Duro Sub-Ohm Tank is the introduction of the HW-N and HW-M Kanthal coil heads. Thinking outside the box, Eleaf created an all-new 0.15 ohm Multi-Hole coil head (pre-installed) that doesn’t rely on endless strands of wire to get the job done. Instead, the Multi-Hole coil structure utilizes a rectangular piece of Kanthal material with countless holes drilled into it. Eleaf iJust 3 Starter Kit: https://www.misthub.com/products/eleaf-ijust-3-kit-with-ello-duro-tank For more great vape deals and vape products, visit our store: http://www.MistHub.com