Open HW's video: DIY fpv rc servo car demo

Some servos and free time! Continuous rotation servo mod: http://www.youtube.com/watch?v=3PrPP_0a8ys I apologize for those that think this was a how to/built video. I read in comments many questions, I might upload a how to video. Feel free to ask any question, I will do my best for an answer and I will try to update video description with some most frequent questions' answers. I use 1cell lipo to power the receiver (rx) on the "car". (tx is the transmitter/controller that sends the "signals" to rx). Then the receiver power the servos. Usually rx max voltage is input voltage (in this case from 1s lipo) about 4 volts. There is no need for an esc for this project, esc is a controler that "regulates" the current/voltage depending on the tx inputs. Every servo has its own motor and its own esc generaly speaking. So, apart from the "frame", anyone that wants to built smthing like this will need: -one continuous rotation servo or 360 servo or free rotation servo to act as the motor -one servo for steering -a transmitter/controller with its receiver. ----------------------------------------------------------------------------------------------------------- If you like my content and want to see more like this, subscribe here: https://www.youtube.com/channel/UCjJQ7yhQc6Ikx_DrjYKuqCw?sub_confirmation=1 ----------------------------------------------------------------------------------------------------------- MUSIC: Alan Walker - Fade [NCS Release] http://www.youtube.com/watch?v=bM7SZ5SBzyY Alan Walker ➞ Facebook http://www.facebook.com/alanwalkermusic/