Oscar 50 Channel's video: Inateck FE2007 2 5 inch HDD SSD Enclosure and USB 3 0 Hub

Inateck sent me this product for testing and it performed reasonably well with read speeds of up to 400Mb/sec and write speeds of up to 120Mb/sec. I used Samsung SSD 830 Series 64GB capacity drive with reduced Write speed which reflects in test results. On some older computers you may not get speed you want even if you use USB 3.0 PCI Card due to PCI Express x1 speed or motherboard limitations. I had to use brand new laptop I just recently bought to provide more realistic results which you could expect from USB 3.0. The product itself is about size of a very large smartphone/phablet and you will likely to need both hands to slide the cover and open the enclosure. Although it weights just about 81 grams and it's dimensions are - 145mm×80mm×15mm. You will also find 3 Port USB 3.0 Hub on it which you could use to connect additional USB devices such as USB pens, External Hard Drives etc. If you need extra power it comes with DC 5V input which connects via provided cable to another USB port. You likely going to need it if you intend to connect additional power hungry devices into those 3 USB ports. But you do not need extra power if you just connect a single hard drive to it. There is also HDD ON/OFF Power button, so you can switch off the power from the hard drive to avoid any data loss or malfunction. It should be noted that it supports UASP (USB Attached SCSI Protocol). Overall excellent product which performed and worked without any issues, only thing I disliked was the way you have to open the enclosure but that's just probably me.