SkiEquipment UK's video: Binding Freedom: Using the Binding Freedom Installation Tap - Anything Technical Ltd

@Binding Freedom: Using the Binding Freedom Installation Tap - Anything Technical Ltd

A short video explaining how to use the Binding Freedom Installation Tap. This is a 5/16-18 Bottoming Tap for threaded insert installation. After drilling a 9.5mm deep hole with an “F” drill (.257″ diameter), the tap is used to cut threads all the way to the bottom of the hole to install the insert. A standard tap won’t cut threads all the way to the bottom, and not all bottoming taps cut as deeply. This one is easier to tap straight because it has four flutes, is designed for cutting wood or metal, and cuts all the way to the bottom of the hole. Fits 1/4″ tap handles.

SkiEquipment UK

Subscribers
429

Total Post
72

Total Views
184.6K

Avg. Views
3.3K

View Profile

This video was published on 2019-08-02 19:41:03 GMT by @SkiEquipment-UK on Youtube. SkiEquipment UK has total 429 subscribers on Youtube and has a total of 72 video.This video has received 1 Likes which are lower than the average likes that SkiEquipment UK gets . @SkiEquipment-UK receives an average views of 3.3K per video on Youtube.This video has received 0 comments which are lower than the average comments that SkiEquipment UK gets . Overall the views for this video was lower than the average for the profile.

SkiEquipment UK's video: Binding Freedom: Using the Binding Freedom Installation Tap - Anything Technical Ltd

Other post by @SkiEquipment UK