Spasmomen's video: Christmas FPV flying

Today I flew for the first time FPV with my quadcopter (MR450)! The small inset at the top right is what I see in my video goggles. Altitude and distance shown in the inset are off, probably because I didn't set the home position. The PID settings still need to be tuned to get rid of that awful wobbling and jello. You'll see that I had quite a bit of distortion in the FPV video. I was flying on the terrain of the archery club behind my house. Read: lots of metal fencing that absorbs the video signal. Because I wanted to sit while flying, I used a bench under the overhanging roof of the club house. All that caused a lot of distortion. Next time I'll take my camping chair and move away of the club house. Air: Home-made frame (MR450) - 10x4.7 props on Turnigy 2217 1050kv motors - 4000 mAh 4s battery - OpenPilot Revo - EzUHF with EzOSD - 1280 Mhz VTx with cloverleaf - Gopro 1 - Sony 600tvl Ground: - Futaba T9CP Super - Eagle Eyes diversity with two VRx with Skew Planar Wheel and Crosshair antennas - Fatshark Dominator - FPV Japan DVR (rebranded by firstpersonview.co.uk)