Tony F's video: CC3D Cleanflight LED Strip Demo

This is just a demo video of my new LEDs. Got my LED Strip with addressable LEDs working tonight with Cleanflight on my CC3D. Had to remove my PWM receiver and at the moment just connected the Speksat to the CC3D Evo FC board and use Serial_RX (as PWM Parallel cannot be used along side the LED strips, you must have a SerialRX or PPM input). Using WS2812B LED strip connected to Motor output Pin 5, power is supplied to the same rail through a 5v/1A max BEC (so power isnt drawn through the flight controller). From other peoples tests these LEDs can draw up to 60mA each, I have 6, so 300mA max current is expected, my FC draws about 50mA and VTx about 60mA. This equates to 410mA total so the current power setup I have is still suitable. Will post another video with full instructions of how I did it at a later date.