×

XDMAN's video: Springfield Armory 2020 Rimfire Project Part 1 DIY Adjustable Cheekrest

@Springfield Armory 2020 Rimfire Project Part 1 DIY Adjustable Cheekrest
From start to finish: Part 1 of the XDMAN's Springfield Armory 2020 Rimfire Project Build. In this episode I will show you how to make an adjustable cheekrest. This how to, can be used for any bolt action rifle and can be made for around 10.00 or less in supplies and in one afternoon. Watch and see how easy it really is to customize your rifle. Shopping List 1. A small sheet of kydex 8x10 inches or less 2. Two 1/4-20 Connector Bolt and Nut 3. Four 1inch washers to fit the bolt and nuts. Contents of this video 0:00 - Intro 1:12 - What things you will need to complete the project 2:50 - Disassemble the stock 3:00 - Making a cheekrest template 6:19 - Test fitting the template 7:09 - Measure once, measure twice and then measure a third time for your holes 7:47 - Drill baby drill! AKA the point of no return 8:38 - Mock up your hardware and adjust 8:50 - Transfer your holes to the template 10:00 - Use your template to mark the Kydex, cut it out and clean it up 11:26 - Mold the Kydex on the stock 12:22 - We have a working mock up 12:40 - Final thoughts and testing it out If the video was helpful, please share it and follow the channel well as our other social media https://xdman.com https://facebook.com/therealxdman https://twitter.com/therealxdman https://instagram.com/therealxdman

15

0
XDMAN
Subscribers
13.2K
Total Post
99
Total Views
765.5K
Avg. Views
9.9K
View Profile
This video was published on 2023-08-19 05:51:35 GMT by @XDMAN on Youtube. XDMAN has total 13.2K subscribers on Youtube and has a total of 99 video.This video has received 15 Likes which are lower than the average likes that XDMAN gets . @XDMAN receives an average views of 9.9K per video on Youtube.This video has received 0 comments which are lower than the average comments that XDMAN gets . Overall the views for this video was lower than the average for the profile.

Other post by @XDMAN