XPlaneFly's video: Tribute to the Space Shuttle Era

The orbiter resembles a conventional aircraft, with double-delta wings swept 81° at the inner leading edge and 45° at the outer leading edge. Its vertical stabilizer's leading edge is swept back at a 50° angle. The four elevons, mounted at the trailing edge of the wings, and the rudder/speed brake, attached at the trailing edge of the stabilizer, with the body flap, control the orbiter during descent and landing. The orbiter has a large payload bay measuring 15 by 60 feet (4.6 by 18 m) comprising most of the fuselage. Two mostly symmetrical lengthwise payload bay doors hinged on either side of the bay comprise its entire top. Payloads are generally loaded horizontally into the bay while the orbiter is oriented vertically on the launch pad and unloaded vertically in the near-weightless orbital environment by the orbiter's robotic remote manipulator arm (under astronaut control), EVA astronauts, or under the payloads' own power (as for satellites attached to a rocket "upper stage" for deployment.) Three Space Shuttle main engines (SSMEs) are mounted on the orbiter's aft fuselage in a triangular pattern. The engine nozzles can swivel 10.5 degrees up and down, and 8.5 degrees from side to side during ascent to change the direction of their thrust to steer the shuttle. The orbiter structure is made primarily from aluminum alloy, although the engine structure is made primarily from titanium alloy. The space-capable orbiters built were OV-102 Columbia, OV-099 Challenger, OV-103 Discovery, OV-104 Atlantis, and OV-105 Endeavour.