nopasanada's video: cambio de anticongelante Coolant antifreeze change PSA XUD7 161A Citroen C15 Visa Pegeout 205

1. Put a heater handles on max position.take off expansion deposit cap and drain screws. 2.Turn out drain plug on the bottom of radiator 3.wait until al liquid runs out,put drain plug back 4.if you want to clean the cooling system use special liquid.put it in the expansion deposit,and fill up the rest with a distillate water until the water start to ran through the drain screws without bubbles. First screw is on the radiator upper part near water pipe. Second is on the heater water pipe third is on the expansion deposit water pipe 5.start an engine until the radiator fans start working (20-30 min) 6.drain the water.put the drain plug back 7.repeat the same only with a distillate water for few times(2-3 times, each time 4-5 litres of water).also you can add about 200 ml of new coolant to water to be more effective (rust inhibitors will starts to cover possibles areas of corrosion working like first coat of a paint) 8.when you drain water for the last time and it was clear transparent, close the radiator drain plug and fill up the system with a new coolant only until it start to ran through the drain screws without bubbles. 9.Rememberr when you fill up the hot engine with liquids you must do it slowly to avoid possible damage for the temperature difference Artist Take/Five (Erin Karaviotis): https://soundcloud.com/takefivemusic https://www.facebook.com/iamtakefive