×

Legit Racecraft's video: DIY Streetfighter 848 Rizoma Clear Timing Belt Cover Install

@DIY Streetfighter 848 Rizoma Clear Timing Belt Cover Install
Using the Fiat diagnostic OBDII adapter: (video coming soon) Ducabike Clear Clutch Cover Installation: https://www.youtube.com/watch?v=umub4km8bbk 10 Weird things with the Streetfighter 848: https://www.youtube.com/watch?v=3hZiq55MdpM 10 Things I LOVE about the Streetfighter 848: https://www.youtube.com/watch?v=m1S6gVht0Xc 10 Things I HATE about the Streetfighter 848: https://www.youtube.com/watch?v=VqD4IJOP3I This is a fairly straight forward upgrade. In order to remove the lower timing belt cover, you need to loosen the upper timing belt cover. If you're removing the upper cover as well then you need to remove the two plastic pieces on each side of the seat, unscrew the seat, unbolt the tank, and then shift the tank to the left. Once this is shifted over you will be able to remove the crankcase ventilation tube and then lift the upper cover out from behind the frame. There are only 5 bolts that hold in the upper cover. This is a beautiful upgrade to the Streetfighter 848 and I would highly recommend it considering the ease of install. It should only take about 2 hours to complete Torque specs: Timing belt covers: 9nm (1st time) 10nm (2nd time) Oil sensor: 10nm Tools needed: 3mm, 4mm, 5mm hex key 24mm wrench for the oil sensor torque wrench with in/lbs or 9/10nm

83

29
Legit Racecraft
Subscribers
17.7K
Total Post
252
Total Views
815.5K
Avg. Views
9.5K
View Profile
This video was published on 2018-12-27 22:14:29 GMT by @HourNine-Racecraft on Youtube. Legit Racecraft has total 17.7K subscribers on Youtube and has a total of 252 video.This video has received 83 Likes which are lower than the average likes that Legit Racecraft gets . @HourNine-Racecraft receives an average views of 9.5K per video on Youtube.This video has received 29 comments which are higher than the average comments that Legit Racecraft gets . Overall the views for this video was lower than the average for the profile.

Other post by @HourNine Racecraft